Home  |  View Shopping Cart  
Main Categories
Shop
1/8 Electric Off-road
1/10 Electric Touring Car
Tools and Accessories
 
Shop > 1/8 Electric Off-road
GRID 4PL 4PLS Drop Down - Satin Black (OUT OF STOCK)  - Product Image

GRID 4PL 4PLS Drop Down - Satin Black (OUT OF STOCK)

The Team GRID CNC machined wheel drop-down adapter for the Futaba 4PL 4PLS radio brings the steering wheel directly in-line with the throttle trigger. The adapter is also lightweight and clean profile matches the styling of the 4PL 4PLS. The Team GRID wheel drop-down adapter takes only minutes to install. Once installed, you will benefit from a more relaxed and comfortable hand position.

Features:

- New two-piece clamshell design

- Installs in minutes with custom bezel ring

- Machined to match 4PL styling

- Compact appearance

- Steering wheel in-line with throttle trigger

- Anodized finish (Satin Black color)

- Fasteners and complete instructions included

 

(Price shown in USD)


SKU Number: TG99066
Price:   $79.00 
Quantity:  


RC8Be, RC8Te, SC8e - GRID motor mount system with outer pinion support - Product Image

RC8Be, RC8Te, SC8e - GRID motor mount system with outer pinion support

The GRID motor mount uses a cam style locking system for precise gear meshing and robust locking method. The motor mount itself utilizes over three mounting screws for secure motor mounting. The outer ball bearing pinion gear support gives the motor shaft maximum support for off-road racing.

Product Features of the Grid motor mount:

- Motor plate with integrated outside ball bearing pinion gear support

- Multiple mounting holes to take full advantage of 4 and 6 hole motors. Uses three of the 4 hole on a Neu/Castle, and uses five of the 6 hole on a Tekin

- Cam style adjustment for precision meshing

- Locking nut chassis mount for fast and secure motor changes

- Pinion range of 13T to 17T

- Recommended pinions are Hot Bodies #67xxx series or others with short shank

NOTE: Motor plate needs to be removed before a pinion change



(Price shown in USD)


SKU Number: TG01009
Price:   $59.00 
Quantity:  


RC8Be, RC8Te, SC8e - GRID motor mount system with inner pinion support - Product Image

RC8Be, RC8Te, SC8e - GRID motor mount system with inner pinion support

The GRID motor mount uses a cam style locking system for precise gear meshing and robust locking method.  The motor mount utilizes over three mounting screws for securel motor mounting.  The inner pinion gear support ball bearing allow pinion gears beyond 18T to be used.

Product Features of the GRID motor mount:

- Motor plate integrated ball bearing pinion gear support (inner version)

- Multiple mounting holes to take full advantage of 4 and 6 hole motors.  Uses all four holes on the Neu/Castle and all six holes on the Tekin.

- Cam style adjustment for precision meshing

- Lock nut chasiss mount for fast and secure motor changes

- Pinion range of 13T to 22T

- Recommended pinions are Hot Bodies #67xxx series or others with short shank

(Price shown in USD)



SKU Number: TG01010
Price:   $59.00 
Quantity:  


GRID motor plate only with inner pinion support - Product Image

GRID motor plate only with inner pinion support

The GRID motor plate with inner pinion support positions support ball bearing behind the pinion gear.  The mounting bolts onto the motor first allowing any size pinion gear to be used afterwards.

Another feature is full utilization of the socket cap mounts screws for either an 4-hole or an 6-hole electric 1/8 motor.  With this mount, you can use all 6 holes available on a Tekin motor and all 4 holes on a Neu/Castle motor.

- Pinion range of 13T to 22T

- Recommended pinions are Hot Bodies #67xxx series or others with short shank

(Price shown in USD) 


SKU Number: TG99010
Price:   $28.00 
Quantity:  


GRID motor plate only with outer pinion support - Product Image

GRID motor plate only with outer pinion support

The GRID motor plate with outer pinion support positions support ball bearing outside the pinion gear. The pinion gear bolts onto the motor first, then the motor is bolted to the motor mount.

Another feature is utilization of the socket cap mounts screws for either an 4-hole or an 6-hole electric 1/8 motor. With this mount, you can use 5 of the 6 holes available on a Tekin motor and all 3 holes on the available 4 holes on a Neu/Castle motor.

- Pinion range of 13T to 17T

- Recommended pinions are Hot Bodies #67xxx series or others with short shank

NOTE: Motor plate needs to be removed before a pinion change

(Price shown in USD)


SKU Number: TG99009
Price:   $32.00 
Quantity:  


Hot Bodies Ve8 - GRID motor mount system with inner pinion support - Product Image

Hot Bodies Ve8 - GRID motor mount system with inner pinion support

The GRID motor mount uses a cam style locking system for precise gear meshing and robust locking method.  The motor mount utilizes over three mounting screws for secure motor mounting.  The inner pinion gear support ball bearing allow pinion gears beyond 18T to be used.

Product Features of the GRID motor mount:

- Motor plate integrated ball bearing pinion gear support (inner version)

- Multiple mounting holes to take full advantage of 4 and 6 hole motors.  Uses all four holes on the Neu/Castle and all six holes on the Tekin.

- Cam style adjustment for precision meshing

- Lock nut chasiss mount for fast and secure motor changes

- Pinion range of 13T to 22T

- Recommended pinions are Hot Bodies #67xxx series or others with short shank

Additional Notes:

Our mounts were not designed for the Ve8 chassis since both battery and motor are on the same side of the chassis, giving no allowance of extra space for neither. Therefore, once the GRID mount is installed, a motor installation/removal will require the front brace and the left steering post to be removed temporarily; which should take only minutes.

Once the motor is installed, you can change pinion gears and adjust the mesh in seconds.

 

(Price shown in USD)


SKU Number: TG02010
Price:   $59.00 
Quantity:  


Team GRID RC8 Suspension Geometry Kit - Product Image

Team GRID RC8 Suspension Geometry Kit

Team GRID suspension kit converts all existing RC8 nitro or electric buggy into a super handling race machine for rough track conditions and slippery hard clay surfaces. Team GRID designed special shock adaptors that bring the shock rod ends deep into the stock arms, and the new front and rear Team GRID shock towers also position the shock more upright. This new geometry enables full progressive action of the suspension arms as it navigates rough track surfaces.  Team GRID shock towers have a five position mount so you can tune the front and rear suspension even further.  The shock towers and adaptors are CNC machined from 5mm thick aluminum

The other nice thing is that the new suspension geometry kit from Team GRID utilizes the readily available RC8B and RC8Be FT suspension arms.  No modification is needed and conversion only takes minutes.

Features:

- For use with RC8 electric and nitro kits

- 5 position top shock mounting

- Low profile bottom shock mounts

- 5mm thick for racing durability

- Anodized CNC machined

(Price shown in USD)


SKU Number: TG01068
Price:   $45.00 
Quantity:  


Hot Bodies Ve8 - GRID SPORT EDITION motor mount system - Product Image

Hot Bodies Ve8 - GRID SPORT EDITION motor mount system

The GRID Ve8 SPORT EDITION motor mount uses a cam style locking system for precise gear meshing and robust locking method.  The motor mount utilizes over three mounting screws for secure motor mounting.

Product Features of the GRID motor mount:

- Motor plate integrated ball bearing pinion gear support (Ball Bearing not included)

- Multiple mounting holes to take full advantage of 4 and 6 hole motors.  Uses all four holes on the Neu/Castle and all six holes on the Tekin.

- Cam style adjustment for precision meshing

- Lock nut chasiss mount for fast and secure motor changes

- Pinion range of 13T to 22T

- Recommended pinions are Hot Bodies #67xxx series or others with short shank

Additional Notes:

Our mounts were not designed for the Ve8 chassis since both battery and motor are on the same side of the chassis, giving no allowance of extra space for neither. Therefore, once the GRID mount is installed, a motor installation/removal will require the front brace and the left steering post to be removed temporarily; which should take only minutes.

Once the motor is installed, you can change pinion gears and adjust the mesh in seconds.

 

(Price shown in USD)


SKU Number: TG02015
Price:   $55.00 
Quantity:  


GRID MT4 MT4S Drop Down - Silver - Product Image

GRID MT4 MT4S Drop Down - Silver

The Team GRID CNC machined wheel drop-down adapter for the Sanwa MT4 radio brings the steering wheel directly in-line with the throttle trigger.  The adapter is also lightweight and clean profile matches the styling of the MT4.

The Team GRID wheel drop-down adapter takes only minutes to install. Once installed, you will benefit from a more relaxed and comfortable hand position.

Features:

- New two-piece clamshell design

- Installs in minutes

- Machined to match MT4 styling

- Compact appearance

- Steering wheel in-line with throttle trigger

- Anodized finish (Silver color)

- Fasteners and complete instructions included

 

(Price shown in USD)


SKU Number: TG99088
Price:   $79.00 
Quantity:  


GRID MT4 MT4S Drop Down - Satin Black - Product Image

GRID MT4 MT4S Drop Down - Satin Black

The Team GRID CNC machined wheel drop-down adapter for the Sanwa MT4 radio brings the steering wheel directly in-line with the throttle trigger.  The adapter is also lightweight and clean profile matches the styling of the MT4.

The Team GRID wheel drop-down adapter takes only minutes to install. Once installed, you will benefit from a more relaxed and comfortable hand position.

Features:

- New two-piece clamshell design

- Installs in minutes

- Machined to match MT4 styling

- Compact appearance

- Steering wheel in-line with throttle trigger

- Anodized finish (Satin Black color)

- Fasteners and complete instructions included


(Price shown in USD)


SKU Number: TG99089
Price:   $79.00 
Quantity:  



www.gridrc.com
Toronto, Ontario
Canada

gridrc@ymail.com